Illuminated Signs
COMPLIANT WITH
Overview
Illuminated signs REQUIRED (per IBC Section 1007.9 & 1009.9)
- Elevator Landing REQUIRES an illuminated sign stating "Emergency Communication" to be located by or on each wall providing access to the Elevator Landing.
- Area of Refuge/Area of Rescue Assistance REQUIRES an illuminated sign stating "Area of Refuge" to be located by or on each door providing access to the Area of Refuge
- Choose from Photoluminescent or Illuminated Wall Signs
AVIRE App (EN)
Photoluminescent Wall Signs
 Area of Refuge Sign Model 7041 Dimensions: 7-3/4″ H x 7-3/4″ W  |  Area of Refuge Sign with Braille Model 7046 Dimensions: 7-3/4″ H x 7-3/4″ W |  Emergency Communication Sign Model 7041E Dimensions: 7-3/4″ H x 7-3/4″ W |  Area of Rescue Assistance Sign Model 7085 Dimensions: 7-3/4″ H x 7-3/4″ W |
- Peel and stick for easy installation
- Sign should be mounted above 60″ but below 80″ from floor to top of sign
- Material is listed under UL 1994 After being exposed to 1 foot candle of light for 60 minutes, a minimum luminance shall be 30 millicandelas
- Photo Luminescent Material Specifications:
- Base material is PVC and a non-toxic pigment is added to create the photoluminescent effect
- Material is listed under UL 1994
- After being exposed to 1 foot candle of light for 60 minutes, a minimum luminance shall be 30 millicandelas per square meter at 10 minutes and 5 millicandelas per square meter after 90 minutes
- Also meets IBC 2015 Section 1025.4 and New York Local Law 24
- Typical material life expectancy is 25+ years
- After being exposed to 1 foot candle of light for 60 minutes, a minimum luminance shall be 30 millicandelas per square meter at 10 minutes and 5 millicandelas per square meter after 90 minutes
- Warranty: 2 years
Illuminated Wall Signs
 Area of Refuge Illuminated Sign Models 7050 (Single Sided) 7050D (Double Sided) Dimensions: 10.5″ H x 14″ W x 3″ D |  Emergency Communication Illuminated Sign Models 7050E (Single Sided) 7050ED (Double Sided) Dimensions: 10.5″ H x 14″ W x 3″ D |  Area of Rescue Assistance Illuminated Sign Models 7090 (Single Sided) 7090D (Double Sided) Dimensions: 10.5″ H x 14″ W x 3″ D |
- Power: 120/277vac (4w, 350mA)
- Voltage surge and short circuit protection
- Battery backup
- LED lights
- Constant uniform illumination
- Aluminum housing with acrylic surface mounts to any surface (4 screw holes)
- Sign should be mounted above 60″ but below 80″ from the floor to top of the sign
- Directional arrows included (set of 3)
- UL listed to meet UL 924, NEC, OSHA, NFPA, and Life Safety Code Illumination requirements
- Warranty: 2 years
Files and Resources
Area of Refuge Signage Specifications
Area of Rescue Signage Specifications
Elevator Landing Signage Specifications
7041E Emergency Communication Sign Data Sheet
Datasheets
Lighted Wall Sign Manual
Install Guides
You might also be interested in
Directional Signs
Directional signs REQUIRED (per IBC Section 1007.10 & 1009.10) that indicate the location of the other means of egress and which are accessible means of egress shall be provided:
At exits serving a required accessible space but not providing an approved means of egress
At Elevator Landings (signs state Emergency Communication)
Within Area(s) of Refuge
At exits serving a required accessible space but not providing an approved means of egress
At Elevator Landings (signs state Emergency Communication)
Within Area(s) of Refuge
Door Signs
Tactile (Braille) signage is REQUIRED at each door to an Area of Refuge, an Elevator Landing or exterior Area for Assisted Rescue complying with IBC 1007.9, IBC 1009.9 and ICC A117.1.
Directions for Call Box Sign
Each Call Box REQUIRES a “Directions for Call Box Use” sign to be mounted next to the Call Box in all Elevator Landings and Area(s) of Refuge/Rescue per IBC Section 1007.11 & 1009.11.
