USA
Multi-Line Command Center for 1- 32 Lines
Only available in
COMPLIANT WITH
Overview
The Multi-Line Command Center System is designed to provide efficient two-way, person-to-person voice communication for installations requiring a phone per elevator or per bank of elevators. The system can accommodate an impressive range of 1 to 116 elevator phones and up to 32 dedicated phone lines. With the ability to have one dedicated phone line per elevator phone, the Multi-Line Command Center makes it easy to guarantee all elevators can get communication without interference.
- The system is compatible with most Rath and Janus Elevator phones, allowing the phone to be tailored to fit the specific needs of your elevator car
- The Distribution Module included as a part of the Multi-Line Command Center acts as a simple, centralized location for all of the system wiring
- Utilizing just one pair of wires between each elevator phone & Distribution Module, the system ensures easy installation.
- All components are engineered to meet current industry codes, ensuring reliability and peace of mind
Power Requirements:
- Command Center and Sub-Master Stations are powered from the Distribution Module (except SmartPhones)
Wiring Requirements:
- SmartPhones to Distribution Module: Single pair
Phone Capabilities:
- Audible alert sounds when phones place a call until Command Center joins conversation
- LEDs indicate which phones have initiated a call
- Rescue personnel can communicate with individual phones and outside party
- Command Center includes handset for communication to elevators
- Standard system allows for 4 incoming Telco lines which are assigned to specific elevator phones
Distribution Module Features:
- Included with Command Center
- Install on a wall or table top
- Requires 120vac power with battery backup or RATH Power Supply
Additional Features:
- Works with both Rath 2100 SmartPhones or Janus EMS phones
- Surface or Flush Cabinets feature powder coated steel enclosure with twist lock closure
Warranty: 2 years
Choose from Surface, Flush or Desk Mount
 2500-__RC Series Surface Mount 2500-__RCF Flush Mount Dimensions vary based on system size. Contact RATH |  2500-__NC Series Desk Mount Dimensions vary based on system size. Contact RATH |  Distribution Modules 5-16 Phone Lines = 2.04″ H x 17.28″ W x 11.8″ D Over 17 Phone Lines = 6.83″ H x 17.18″ W x 8.9″ D |
You might also be interested in
UPS Power Supplies for Command Centers
Designed to work with all Rath Command Center, Multi-Line and IP Command Center Systems
These power supplies ensure that your system remains operational for a minimum of 24 hours under quiescent load (when the system is in a non-alarm condition)
Following this period, they retain the capability to activate all alarm notification appliances used for evacuation, functioning for 60 minutes in total darkness
Tailored to support the Command Center's Analog or IP configurations, these power supplies provide a robust and reliable solution, enhancing the safety and efficiency of your elevators and buildings
These power supplies ensure that your system remains operational for a minimum of 24 hours under quiescent load (when the system is in a non-alarm condition)
Following this period, they retain the capability to activate all alarm notification appliances used for evacuation, functioning for 60 minutes in total darkness
Tailored to support the Command Center's Analog or IP configurations, these power supplies provide a robust and reliable solution, enhancing the safety and efficiency of your elevators and buildings
Machine Room Intercoms SHW-MRI
The SHW-MRI system by Janus is designed to provide efficient communication between a single or two-car elevator group and the machine room. Designed to work with all Rath and Janus phones, industry leaders in elevator emergency communication.
Efficient Installation: SHW-MRI does not require any modification to be done in the elevator car or any additional phone lines allowing installation to be completed in an average of 20 minutes
Small, Compact Size: Compact but powerful footprint allows for an SHW-MRI to be installed to be installed on any wall, even if construction is completed, making it an effective solution for small retrofit installations
All components are engineered to meet current industry codes, ensuring reliability and peace of mind
Efficient Installation: SHW-MRI does not require any modification to be done in the elevator car or any additional phone lines allowing installation to be completed in an average of 20 minutes
Small, Compact Size: Compact but powerful footprint allows for an SHW-MRI to be installed to be installed on any wall, even if construction is completed, making it an effective solution for small retrofit installations
All components are engineered to meet current industry codes, ensuring reliability and peace of mind
Machine Room Intercom with Handset MRI-HDSTL
Innovative technology enables the Machine Room Intercom to work with any type of ADA compliant elevator phone, allowing a low cost, easy to install retrofit solution.
Just plug in the included touch tone phone (HDSTL) to the provided jack, press the button and call the elevator phone.
