2500 Series SmartRescue Base Stations

• Complies with Section 6.4 of UL 60950-1
• Conforms to UL Standard 2017 for Attendant Monitored Signaling Devices
• Volume control handset meets ADA requirements

Power Requirements:

• Requires a single analog (POTS, PBX, or central office phone line) or digital phone line. If used on an IP or cellular network, you must purchase an additional interface device from RATH
• Designed for either 120vac power or 24vdc power

Wiring Requirements: Run twisted, shielded 4 wire set from each Call Box to SmartRescue and one standard phone line to the outside world

Phone Capabilities: Telephone Line Voltage: 24V-48V

Additional Features:

• Passively monitor communications between Call Boxes and the outside world via the LEDs: Solid lit LED indicates there is an emergency call in progress, slow blinking LED indicates there is a call on hold
• Audible alert when Call Box initiates a call, silenced when call is joined from Base Station
• Includes relay contact that trips if any Call Box has been activated
• The SmartRescue is able to:
  • Call into all or individual Call Boxes as needed
  • Join existing conversations between Call Boxes and outside world
  • Hang up and original conversation will continue
  • Terminate outside world so it is only talking to the Call Boxes or terminate the call with all parties entirely
  • Built-in battery backup recharges from 120vac power (allows for a minimum of 4 hours talk time upon loss of power)
  • 16.8V 1400mAH battery (part # RP7300109A)

Warranty: 2 years