USA
Overview
Our PoE Powered IP Elevator Solution includes any of our standard 2100 Series IP SmartPhones.
This will allow you to access your customer's SIP phone system utilizing a standard, fully code compliant phone with a simple, hassle free installation.
Additional Compliance:
• If installation requires phone line verification, you must use an In Car Analog Phone with Remote IP RATH® 2100-VOIP2CS Interface Device
Power Requirements: Designed for PoE at 802.3af or 12vdc power source with battery backup
Wiring Requirements:
• Requires Cat5e or better cable (maximum 300' run to network switch)
• Connects to Ethernet cable with a standard RJ45 jack
• Connections: FXS RJ11, LAN, and WAN RJ45 (10/100 BaseT)
• Includes one FXS port, one LAN, and one WAN port
• IP protocols: IPv4, TCP, UDP, DHCP, SNTP, STUN, HTTP, and PPPoE
Programming Features:
• Phones program like a standard SmartPhone but the IP communication requires a laptop for programming
• On-site programming
• Programmable with up to 5 emergency numbers
• Recordable location message (18 seconds)
• Pictorial keypad
Phone Capabilities:
• Automatic dialer (31 digit programmable memory)
• Automatic answer feature with audible ring
• Can place a call either on IP Network or IP service provider
Additional Features:
• Ideal for single or multiple phone installations in new construction or modernization projects
• Meets Communication Failure Code Requirements
Specifications:
• Environmental: -40°F - +150°F
• Mounting: Surface, Flush or Behind-the-Panel Mount
Warranty: 2 years
You might also be interested in
2100-VOIP2CS IP Interface
Our 2100-VOIP2CS IP Interface will allow you to access your customer's SIP phone system utilizing a standard, fully code compliant phone.
This solutions includes any of our standard 2100 Series SmartPhones with our 2100-VOIP2CS IP Interface Device
Available as a complete system or retrofit an existing RATH SmartPhone in the field
Ideal for single phone installations either in a new construction project or when a building owner has upgraded their phone system to IP
This solutions includes any of our standard 2100 Series SmartPhones with our 2100-VOIP2CS IP Interface Device
Available as a complete system or retrofit an existing RATH SmartPhone in the field
Ideal for single phone installations either in a new construction project or when a building owner has upgraded their phone system to IP
Residential Elevator Phones
Our residential/home elevator Telephone Line Powered phones are simple to install and operate. Choose from 3 mounting styles.
OEM or Behind the Panel Mount Elevator Phones
Our External Powered OEM Mount Elevator SmartPhones replacement were designed for elevator manufacturers to replace existing phones.
Select several different mounting options or contact us for direct mount competitor replacement units
