DCP Lift Digital Communication Platform
COMPLIANT WITH
Overview
MEMCO Digital Communications Platform (DCP) ensures lift compliance and passenger safety by Smart GSM, autodialler, and remote monitoring.
DCP is the brain of communication system combining a Global System for Mobile communication (GSM) gateway, lift emergency telephone and Machine-to-Machine (M2M) gateway.
Removing installation of new lift controller, M2M allows remote configuration of all connected devices and supports extraction of lift monitoring data. Technicans can choose to program the system remotely via the AVIRE HUB or onsite via the main unit in the machine room or control cabinet. Digital Audio Units (DAU) in the lift cars and/or pits connect to the DCP over a 4-wire CAN Bus system. Using the cellular data network to send technical and configuration calls reduces voice call costs, and significantly improves reliability.
Smart GSM and autodialler
Digital or analog upgrade
Remote monitoring in AVIRE HUB
No landline required (works with SIM cards)
Comply with mandatory emergency lift phone requirement
Signal strength tester
Quick installation
Integrated battery backup
High digital audio quality over 400m cables
Compatible with COP, TOC, or Pit mounted digital audio units
CAN and LPBus connections
Optional LPBus inductive loop and triphony units
Supports up to four lift cars
Technical drawings
DCP Lift Digital Communication Platform Drawing 1
Files and Resources
DCP Datasheet (English)
Datasheets
4G Digital Communications Platform Installation Guide (English)
Install Guides
DCP and DAU Installation: How to program a guidance and location message (English)
Support documents
DCP and DAU: Call Centre Instructions (English)
Support documents
How to install a Digital Communication Platform (DCP)
You might also be interested in
AVIRE HUB Lift Monitoring Software
Stay on top of your entire lift installation portfolio with advanced lift software in the AVIRE HUB. Remotely monitor, program, and update devices, receive alerts and alarms, and comply with regulations with test calls and an audit trail.
Memcom+ Accessories Flush Mount COP
A range of lift emergency telephone products with speaker and microphone, for flush mount installation on the Car Operating Panel (COP). From simple units with LED indicators to premium stainless steel plates with pictograms and alarm push buttons.
DCP Accessories CAN Bus Splitter
CAN Bus is the ‘nervous system’ of lift network, acting as an intermediate between one Digital Communication Platform (DCP) and multiple Digital Audio Units. Connecting up to four CAN Bus lines with MEMCO CAN Bus splitter could simplify multiple-shaft or single-shaft installation wiring. CAN Bus Splitter contains five CAN terminating resistors without the need of power supply.
