Memcom+ Lift Emergency Phone
COMPLIANT WITH
Overview
Memcom+ lift emergency phone is a high-quality, and reliable autodialler that provides trapped passengers quick and easy access to emergency assistance. The unit consists of a speaker, microphone, and backlit LCD for programming and status updates.
Fully compliant autodialler and engineers’ intercom
Connects to Multi Point Station (MPS)
Backlit LCD display for programming and status
Easy programming
Connect up to 8 MEMCOM emergency telephone units to the same phone line
Up to 4 alarm numbers and 2 technical alarms
Connect to AVIRE HUB for technical alert management, test calls, and ability to remotely program installed units
Technical drawings
Memcom+ Lift Emergency Phone
Files and Resources
Memcom and Accessories Information Sheet (English)
Datasheets
Memcom Emergency Telephone from MEMCO by AVIRE
You might also be interested in
DCP Lift Digital Communication Platform
MEMCO Digital Communications Platform (DCP) ensures lift compliance and passenger safety by Smart GSM, autodialler, and remote monitoring.
DCP is the brain of communication system combining a Global System for Mobile communication (GSM) gateway, lift emergency telephone and Machine-to-Machine (M2M) gateway.
Removing installation of new lift controller, M2M allows remote configuration of all connected devices and supports extraction of lift monitoring data. Technicans can choose to program the system remotely via the AVIRE HUB or onsite via the main unit in the machine room or control cabinet. Digital Audio Units (DAU) in the lift cars and/or pits connect to the DCP over a 4-wire CAN Bus system. Using the cellular data network to send technical and configuration calls reduces voice call costs, and significantly improves reliability.
AVIRE HUB Lift Monitoring Software
Stay on top of your entire lift installation portfolio with advanced lift software in the AVIRE HUB. Remotely monitor, program, and update devices, receive alerts and alarms, and comply with regulations with test calls and an audit trail.
DCP Accessories CAN Bus Splitter
CAN Bus is the ‘nervous system’ of lift network, acting as an intermediate between one Digital Communication Platform (DCP) and multiple Digital Audio Units. Connecting up to four CAN Bus lines with MEMCO CAN Bus splitter could simplify multiple-shaft or single-shaft installation wiring. CAN Bus Splitter contains five CAN terminating resistors without the need of power supply.
