2100-VOIP2CS IP Interface
- This solutions includes any of our standard 2100 Series SmartPhones with our 2100-VOIP2CS IP Interface Device
- Available as a complete system or retrofit an existing RATH SmartPhone in the field
- Ideal for single phone installations either in a new construction project or when a building owner has upgraded their phone system to IP
Dimensions: 1.12" H x 4" W x 4" D
Additional Compliance:
• FCC Part 15 Class B Compliant
Interface Features:
• Allows up to (2) RATH 2100 series phones on an IP phone system
• Phone line verification included
• Install either in the machine room or a phone room
• Simple to configure to your customer's IP system (requires a laptop)
• Can place a call on a Cisco Network or cloud based service provider
• Includes two FXS ports (one LAN and one WAN)
• VoIP Protocols: SIP v2, SDP, RTP, and RFC 2833
• Network Protocols: IPv4, TCP, UDP, DHCP, SNTP, STUN, HTTP, and PPPoE
• Connections: FXS RJ11 and WAN RJ45 (10/100 BaseT)
• Power Consumption: 5w
Power Requirements:
• 120vac from a backed up power source or RATH® RP7700100
Wiring Requirements:
• Requires a standard copper run between the elevator phone and 2100-VOIP2CS
• Connect the elevator phone to 2100-VOIP2CS via a standard RJ11 jack and to SIP phone system via a standard RJ45 jack (maximum wire run of 300' between 2100-VOIP2CS and Network Switch)
Specifications:
• Environmental: 32°F - 13°F
Warranty: 2 years
Specifiers' Corner
The Specifiers’ Corner is designed to provide Architects, Engineers, Contractors, Fire Marshals, Building Code Officials, Inspectors, AHJs, and end users with the essential information that may be needed for a project: Submittal Documents, Manuals/Wiring Diagrams, Data Sheets,CAD and Code Requirements
Contact info
You also can contact us through our phone number, our email address, and we’ll get back to you