SmartRescue Call Boxes (2100 Series)

Additional Compliance:

• Conforms to UL Standard 2017 for Attendant Monitored Signaling Devices
• Complies with Section 6.4 of UL 60950-1

Power Requirements: 24vdc from part # 2500-PWR24U Programming Features:

• Programmable with up to 5 emergency numbers
• Recordable location message (18 seconds)
• On-site keypad programming or remote programming

Phone Capabilities:

• Requires analog telephone line (POTS, PBX, or central office line)
• Phone checks every 24 hours for an active phone line, if one is not detected, phone will provide a relay trip
• Automatic answer feature with audible ring
• Touch Tone operation only (Touch Tone is an AT&T registered trademark)

Supervision:
Includes built-in communication verification software and a failure relay output which can be connected to an addressable fire alarm module or the fire control panel

Additional Features:

• Built-in 10 phone consolidator feature allows you to install 10 call boxes and 1 Base Station on a single telephone line
• Remote or on-site diagnostic test
• Automatic dialer (31 digit programmable memory)
• Built-in battery backup recharges from 24vdc power (allows for a minimum of 4 hours of talk time upon power loss)
• 7.2V 300mAH battery (part # RP7300110)
• Optional Strobe interface and relay

Warranty:
2 years