USA
2400 Series Command Center Call Boxes
Only available in
COMPLIANT WITH
Overview
Each Area of Refuge requires hands-free, two-way emergency communication devices (Call Boxes) on each floor above and below the main exit floor.
- The Command Center Call Boxes, designed for large-scale installations of up to 116 Call Boxes, provide a reliable means for distressed individuals to communicate with rescue personnel during an emergency
- Utilizing a single pair of wires for each Call Box, the system ensures an efficient and cost-effective installation process
- The Command Center Call Boxes offer a scalable and robust solution without compromising on quality or compliance, ensuring top-tier reliability and adherence to industry standards
AVIRE App (EN)
Additional Compliance:
- Conforms to UL Standard 2017 for Attendant Monitored Signaling Devices
- Complies with Section 6.4 of UL 60950-1
Power Requirements: 24vdc from part # 2500-PWR24U
Programming Features:
- Programmable with up to 5 emergency numbers
- Recordable location message (18 seconds)
- On-site keypad programming or remote programming
Phone Capabilities:
- Requires analog telephone line (POTS, PBX, or central office line)
- Phone checks every 24 hours for an active phone line, if one is not detected, phone will provide a relay trip
- Automatic answer feature with audible ring
- Touch Tone operation only (Touch Tone is an AT&T registered trademark)
Supervision: Includes built-in communication verification software and a failure relay output which can be connected to an addressable fire alarm module or the fire control panel
Additional Features:
- Built-in 10 phone consolidator feature allows you to install 10 Call Boxes and 1 Base Station on a single telephone line
- Remote or on-site diagnostic test
- Automatic dialer (31 digit programmable memory)
- Built-in battery backup recharges from 24vdc power (allows for a minimum of 4 hours of talk time upon power loss)
- 7.2V 300mAH battery (part # RP7300110)
- Optional Strobe interface and relay
Warranty: 2 years
Command Center Call Boxes available in 3 mounting options:
Flush Mount
2400-808NSP Flush Mount Face Plate: 9-1/2″ H x 7-1/2″ W Back Box: 8″ H x 6″ W x 3″ D Style: Brushed Stainless Steel |  2400-808NMP Flush Mount Face Plate: 9-1/2″ H x 7-1/2″ W Back Box: 8″ H x 6″ W x 3″ D Style: Antique Bronze |  2400-808SSPC2 Flush Mount with Cover Face Plate: 11-3/8″ H x 8″ W Back Box: 9-7/8″ H x 6-1/2″ W x 3″ D Cover: 9-3/4″ H x 6-1/2″ W x 1-1/4″” D Style: Brushed Stainless Steel |
Surface Mount
 2400-805SP Surface Mount 7-1/4″ H x 4-3/4″ W x 1-7/8″ D Style: Stainless Steel Box |  2400-805SPM Surface Mount 7-1/4″ H x 4-3/4″ W x 1-7/8″ D Style: Stainless Steel Box |  2400-805SSPC2 Surface Mount and Cover Face Plate: 10″ H x 6-17/25″ W Back Box: 9-7/8″ H x 6-1/2″ W x 3″ D Cover: 9-3/4” H x 6-1/2” W x 1-1/4” D |  2400-805RP Surface Mount 7-1/4″ H x 4-3/4″ W x 1-7/8″ D Style: Red Powder Coated |
Exterior Rated
 2400-805LP Surface Mount 9-7/8″ H x 6-5/8″ W x 3-1/4″ D Style: Red Fiberglass, NEMA, Exterior Rated |  2400-805LPC1 Surface Mount with Cover Call Box Size: 9-7/8″ H x 6-5/8″ W x 3-1/4″ D Cover Size: 6-2/5″ H x 3-3/4″ W x 2-1/4″ D Style: Red Fiberglass, NEMA, Exterior Rated |
You might also be interested in
Command Center 360° Supervision
NFPA 72 2016 360° Supervision requirements state that pathways between the remote call stations and the master control station shall be monitored for integrity.
To meet these requirements:
Each 2400 Series Call Box, Command Center, and outside phone line connect directly into the RATH Supervisor Board (2500__-SPRVSR). The 2500-__SPRVSR has a Communications Failure relay output that can be connected to an addressable fire alarm module or fire control panel
If power supervision is needed, an additional purchase of the UPS Monitor (2500-UPSMONITOR), which includes a Power Failure relay output, is required.
Each 2400 Series Call Box, Command Center, and outside phone line connect directly into the RATH Supervisor Board (2500__-SPRVSR). The 2500-__SPRVSR has a Communications Failure relay output that can be connected to an addressable fire alarm module or fire control panel
If power supervision is needed, an additional purchase of the UPS Monitor (2500-UPSMONITOR), which includes a Power Failure relay output, is required.
Command Center Power Supplies
Our range of power supplies for the Command Center system is designed to meet backup requirements as dictated by NFPA 72.
These power supplies ensure that your system remains operational for a minimum of 24 hours under quiescent load (when the system is in a non-alarm condition)
Following this period, they retain the capability to activate all alarm notification appliances used for evacuation or directing aid to the area of refuge, functioning for 60 minutes in total darkness
Tailored to support the Command Center's analog configuration for up to 116 Call Boxes, these power supplies provide a robust and reliable solution, enhancing the safety and efficiency of your Area of Refuge system
These power supplies ensure that your system remains operational for a minimum of 24 hours under quiescent load (when the system is in a non-alarm condition)
Following this period, they retain the capability to activate all alarm notification appliances used for evacuation or directing aid to the area of refuge, functioning for 60 minutes in total darkness
Tailored to support the Command Center's analog configuration for up to 116 Call Boxes, these power supplies provide a robust and reliable solution, enhancing the safety and efficiency of your Area of Refuge system
2500 Series Command Center and Distribution Modules
A code-compliant Area of Refuge System requires a central control point to manage emergency assistance calls from Call Boxes.
The Command Center base stations, designed to handle up to 116 Call Boxes, provide a seamless means of communication between stranded individuals, rescue personnel, and offsite parties
Utilizing an analog home run configuration with a single pair of wires for each Call Box, the system ensures an efficient and cost-effective installation process
The system includes Base Stations and Distribution Modules, Power Supply with battery backup sold separately
The Command Center base stations, designed to handle up to 116 Call Boxes, provide a seamless means of communication between stranded individuals, rescue personnel, and offsite parties
Utilizing an analog home run configuration with a single pair of wires for each Call Box, the system ensures an efficient and cost-effective installation process
The system includes Base Stations and Distribution Modules, Power Supply with battery backup sold separately
