2100-VOIP2CS-IP-Interface
Rath Janus

2100-VOIP2CS IP Interface

Only available in
USA
COMPLIANT WITH
ASME-and-CSA-logo
ASME /CSA
Overview
Our 2100-VOIP2CS IP Interface will allow you to access your customer's SIP phone system utilizing a standard, fully code compliant phone.
  • This solutions includes any of our standard 2100 Series SmartPhones with our 2100-VOIP2CS IP Interface Device
  • Available as a complete system or retrofit an existing RATH SmartPhone in the field
  • Ideal for single phone installations either in a new construction project or when a building owner has upgraded their phone system to IP
Stand-alone-Analog-Phones-with-IP-Interface

Dimensions: 1.12" H x 4" W x 4" D

Additional Compliance:
• FCC Part 15 Class B Compliant

Interface Features:
• Allows up to (2) RATH 2100 series phones on an IP phone system
• Phone line verification included
• Install either in the machine room or a phone room
• Simple to configure to your customer's IP system (requires a laptop)
• Can place a call on a Cisco Network or cloud based service provider
• Includes two FXS ports (one LAN and one WAN)
• VoIP Protocols: SIP v2, SDP, RTP, and RFC 2833
• Network Protocols: IPv4, TCP, UDP, DHCP, SNTP, STUN, HTTP, and PPPoE
• Connections: FXS RJ11 and WAN RJ45 (10/100 BaseT)
• Power Consumption: 5w

Power Requirements:
• 120vac from a backed up power source or RATH® RP7700100

Wiring Requirements:
• Requires a standard copper run between the elevator phone and 2100-VOIP2CS
• Connect the elevator phone to 2100-VOIP2CS via a standard RJ11 jack and to SIP phone system via a standard RJ45 jack (maximum wire run of 300' between 2100-VOIP2CS and Network Switch)

Specifications:
• Environmental: 32°F - 13°F

Warranty: 2 years

York Racecourse modernises its lifts for improved experience
Unitas, Stoke City Council wins with full lift safety package
Oldest Inn in Germany Installs Latest Lift Safety Technology
Digital Switch in Spain: digitalising emergency lift phones