Machine-Room-7100
Rath Janus

Machine Room Unit 7100

Only available in
USA
Overview
The SmartView 2 Machine Room Unit provides the conversion from twisted pair to ethernet and POTS line and power to the SmartView 2 Elevator unit. This is essential to the system for connectivity of audio / video to the outside world and power. The requirement of the system is one SmartView Machine Room unit to one SmartView 2 Elevator unit, without both in a system the SmartView 2 will not function.
7100-Machine-Room

Dimensions: 1.63"H x 6.10" W x 4.25" D

Code Compliance:

  • Conforms to ASME Standard 17.1
  • Certified to UL 62368-1

Power Requirements:

  • 24vdc UL Rated Power Supply with a current rating of 1.66A or greater (Comes with 7100)
  • Connections: Ethernet, USB, Telephone, Screw Terminals

Wiring Requirements:

  • Plug 24vdc, 1.66A power supply into ‘POWER’ on device
  • Plug Ethernet internet cable into ETH2 on device
  • Plug telephone line RING and TIP into TEL IN
  • Connect elevator phone and machine room device via PLC on both devices
  • Note: All connections require attention to ensure correct polarity of positive (+) and negative (-). This also applies to RING and TIP on TEL IN

Environmental: 32° F to 122° F (0° C to 50° C)

Current Draw: Active=1A Idle=0.5A

Warranty: 2 years

York Racecourse modernises its lifts for improved experience
Unitas, Stoke City Council wins with full lift safety package
Oldest Inn in Germany Installs Latest Lift Safety Technology
Digital Switch in Spain: digitalising emergency lift phones